CVEdetails.com the ultimate security vulnerability data source
(e.g.: CVE-2009-1234 or 2010-1234 or 20101234)
Log In   Register
  What's the CVSS score of your company?
Vulnerability Feeds & WidgetsNew   www.itsecdb.com  

Security Vulnerabilities (CVSS score between 5 and 5.99)

Press ESC to close
# CVE ID CWE ID # of Exploits Vulnerability Type(s) Publish Date Update Date Score Gained Access Level Access Complexity Authentication Conf. Integ. Avail.
5551 CVE-2020-1863 125 2020-03-12 2020-03-18
5.0
None Remote Low Not required None None Partial
Huawei USG6000V with versions V500R001C20SPC300, V500R003C00SPC100, and V500R005C00SPC100 have an out-of-bounds read vulnerability. Due to a logical flaw in a JSON parsing routine, a remote, unauthenticated attacker could exploit this vulnerability to disrupt service in the affected products.
5552 CVE-2020-1860 20 Bypass 2020-02-28 2021-07-21
5.0
None Remote Low Not required None Partial None
NIP6800;Secospace USG6600;USG9500 products with versions of V500R001C30; V500R001C60SPC500; V500R005C00SPC100 have an access control bypass vulnerability. Attackers that can access to the internal network can exploit this vulnerability with careful deployment. Successful exploit may cause the access control to be bypassed, and attackers can directly access the Internet.
5553 CVE-2020-1858 DoS 2020-02-17 2020-02-20
5.0
None Remote Low Not required None None Partial
Huawei products NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00SPC100; Secospace USG6600 versions V500R001C30SPC600, V500R001C60SPC500, and V500R005C00SPC100; and USG9500 versions V500R001C30SPC600, V500R001C60SPC500, and V500R005C00SPC100 have a denial of service vulnerability. Attackers need to perform a series of operations in a special scenario to exploit this vulnerability. Successful exploit may cause the new connections can't be established, result in a denial of service.
5554 CVE-2020-1856 200 +Info 2020-02-17 2021-07-21
5.0
None Remote Low Not required Partial None None
Huawei NGFW Module, NIP6300, NIP6600, Secospace USG6500, Secospace USG6600, and USG9500 versions V500R001C30, V500R001C60, and V500R005C00 have an information leakage vulnerability. An attacker can exploit this vulnerability by sending specific request packets to affected devices. Successful exploit may lead to information leakage.
5555 CVE-2020-1847 DoS 2020-11-13 2020-11-30
5.0
None Remote Low Not required None None Partial
There is a denial of service vulnerability in some Huawei products. There is no protection against the attack scenario of specific protocol. A remote, unauthorized attackers can construct attack scenarios, which leads to denial of service.Affected product versions include:NIP6300 versions V500R001C30,V500R001C60;NIP6600 versions V500R001C30,V500R001C60;Secospace USG6300 versions V500R001C30,V500R001C60;Secospace USG6500 versions V500R001C30,V500R001C60;Secospace USG6600 versions V500R001C30,V500R001C60;USG9500 versions V500R001C30,V500R001C60.
5556 CVE-2020-1841 200 +Info 2020-02-17 2021-07-21
5.0
None Remote Low Not required Partial None None
Huawei CloudLink Board version 20.0.0; DP300 version V500R002C00; RSE6500 versions V100R001C00, V500R002C00, and V500R002C00SPC900; and TE60 versions V500R002C00, V600R006C00, V600R006C00SPC200, V600R006C00SPC300, V600R006C10, V600R019C00, and V600R019C00SPC100 have an information leak vulnerability. An unauthenticated, remote attacker can make a large number of attempts to guess information. Successful exploitation may cause information leak.
5557 CVE-2020-1832 787 Exec Code Overflow 2020-05-29 2020-06-02
5.8
None Local Network Low Not required Partial Partial Partial
E6878-370 products with versions of 10.0.3.1(H557SP27C233) and 10.0.3.1(H563SP1C00) have a stack buffer overflow vulnerability. The program copies an input buffer to an output buffer without verification. An attacker in the adjacent network could send a crafted message, successful exploit could lead to stack buffer overflow which may cause malicious code execution.
5558 CVE-2020-1830 125 2020-02-18 2020-02-20
5.0
None Remote Low Not required None None Partial
Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have a vulnerability that a memory management error exists when IPSec Module handing a specific message. This causes 1 byte out-of-bound read, compromising normal service.
5559 CVE-2020-1829 415 2020-02-17 2020-02-20
5.0
None Remote Low Not required None None Partial
Huawei NIP6800 versions V500R001C30 and V500R001C60SPC500; and Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, and V500R001C60SPC500 have a vulnerability that the IPSec module handles a message improperly. Attackers can send specific message to cause double free memory. This may compromise normal service.
5560 CVE-2020-1828 20 2020-02-17 2021-07-21
5.0
None Remote Low Not required None None Partial
Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; and Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have an input validation vulnerability where the IPSec module does not validate a field in a specific message. Attackers can send specific message to cause out-of-bound read, compromising normal service.
5561 CVE-2020-1827 404 +Info 2020-02-17 2020-02-20
5.0
None Remote Low Not required None None Partial
Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00SPC100; and Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00SPC100 have an information leakage vulnerability. An attacker can exploit this vulnerability by sending specific request packets to affected devices. Successful exploit may lead to information leakage.
5562 CVE-2020-1810 327 +Info 2020-01-09 2020-01-21
5.0
None Remote Low Not required Partial None None
There is a weak algorithm vulnerability in some Huawei products. The affected products use the RSA algorithm in the SSL key exchange algorithm which have been considered as a weak algorithm. Attackers may exploit this vulnerability to leak some information.
5563 CVE-2020-1808 125 2020-05-15 2020-07-27
5.8
None Remote Medium Not required Partial None Partial
Honor 20;HONOR 20 PRO;Honor Magic2;HUAWEI Mate 20 X;HUAWEI P30;HUAWEI P30 Pro;Honor View 20 smartphones with versions earlier than 10.0.0.187(C00E60R4P11); versions earlier than 10.0.0.187(C00E60R4P11); versions earlier than 10.0.0.176(C00E60R2P11);9.1.0.135(C00E133R2P1); versions earlier than 10.1.0.123(C431E22R3P5), versions earlier than 10.1.0.126(C636E5R3P4), versions earlier than 10.1.0.160(C00E160R2P11); versions earlier than 10.1.0.126(C185E8R5P1), versions earlier than 10.1.0.126(C636E9R2P4), versions earlier than 10.1.0.160(C00E160R2P8); versions earlier than 10.0.0.179(C636E3R4P3), versions earlier than 10.0.0.180(C185E3R3P3), versions earlier than 10.0.0.180(C432E10R3P4), versions earlier than 10.0.0.181(C675E5R1P2) have an out of bound read vulnerability. The software reads data past the end of the intended buffer. The attacker tricks the user into installing a crafted application, successful exploit may cause information disclosure or service abnormal.
5564 CVE-2020-1806 125 2020-04-27 2020-04-30
5.8
None Remote Medium Not required Partial None Partial
Huawei Honor V10 smartphones with versions earlier than 10.0.0.156(C00E156R2P4) has three out of bounds vulnerabilities. Certain driver program does not sufficiently validate certain parameters received, that would lead to several bytes out of bound read. Successful exploit may cause information disclosure or service abnormal. This is 3 out of 3 out of bounds vulnerabilities found. Different than CVE-2020-1804 and CVE-2020-1805.
5565 CVE-2020-1805 125 2020-04-27 2020-05-01
5.8
None Remote Medium Not required Partial None Partial
Huawei Honor V10 smartphones with versions earlier than 10.0.0.156(C00E156R2P4) has three out of bounds vulnerabilities. Certain driver program does not sufficiently validate certain parameters received, that would lead to several bytes out of bound read. Successful exploit may cause information disclosure or service abnormal. This is 2 out of 3 out of bounds vulnerabilities found. Different than CVE-2020-1804 and CVE-2020-1806.
5566 CVE-2020-1804 125 2020-04-27 2020-05-01
5.8
None Remote Medium Not required Partial None Partial
Huawei Honor V10 smartphones with versions earlier than 10.0.0.156(C00E156R2P4) has three out of bounds vulnerabilities. Certain driver program does not sufficiently validate certain parameters received, that would lead to several bytes out of bound read. Successful exploit may cause information disclosure or service abnormal. This is 1 out of 3 out of bounds vulnerabilities found. Different than CVE-2020-1805 and CVE-2020-1806.
5567 CVE-2020-1799 416 Exec Code 2020-05-21 2020-05-21
5.4
None Local Network Medium Not required Partial Partial Partial
E6878-370 with versions of 10.0.3.1(H557SP27C233), 10.0.3.1(H563SP1C00), 10.0.3.1(H563SP1C233) has a use after free vulnerability. The software references memory after it has been freed in certain scenario, the attacker does a series of crafted operations through web portal, successful exploit could cause a use after free condition which may lead to malicious code execution.
5568 CVE-2020-1777 200 +Info 2020-10-15 2021-10-19
5.0
None Remote Low Not required Partial None None
Agent names that participates in a chat conversation are revealed in certain parts of the external interface as well as in chat transcriptions inside the tickets, when system is configured to mask real agent names. This issue affects OTRS; 7.0.21 and prior versions, 8.0.6 and prior versions.
5569 CVE-2020-1773 331 2020-03-27 2020-09-23
5.5
None Remote Low ??? Partial Partial None
An attacker with the ability to generate session IDs or password reset tokens, either by being able to authenticate or by exploiting OSA-2020-09, may be able to predict other users session IDs, password reset tokens and automatically generated passwords. This issue affects ((OTRS)) Community Edition: 5.0.41 and prior versions, 6.0.26 and prior versions. OTRS; 7.0.15 and prior versions.
5570 CVE-2020-1772 2020-03-27 2021-09-14
5.0
None Remote Low Not required Partial None None
It's possible to craft Lost Password requests with wildcards in the Token value, which allows attacker to retrieve valid Token(s), generated by users which already requested new passwords. This issue affects: ((OTRS)) Community Edition 5.0.41 and prior versions, 6.0.26 and prior versions. OTRS: 7.0.15 and prior versions.
5571 CVE-2020-1768 613 2020-02-07 2020-02-11
5.5
None Remote Low ??? Partial None Partial
The external frontend system uses numerous background calls to the backend. Each background request is treated as user activity so the SessionMaxIdleTime will not be reached. This issue affects: OTRS 7.0.x version 7.0.14 and prior versions.
5572 CVE-2020-1765 20 2020-01-10 2020-09-23
5.0
None Remote Low Not required None Partial None
An improper control of parameters allows the spoofing of the from fields of the following screens: AgentTicketCompose, AgentTicketForward, AgentTicketBounce and AgentTicketEmailOutbound. This issue affects: ((OTRS)) Community Edition 5.0.x version 5.0.39 and prior versions; 6.0.x version 6.0.24 and prior versions. OTRS 7.0.x version 7.0.13 and prior versions.
5573 CVE-2020-1763 125 2020-05-12 2021-02-12
5.0
None Remote Low Not required None None Partial
An out-of-bounds buffer read flaw was found in the pluto daemon of libreswan from versions 3.27 till 3.31 where, an unauthenticated attacker could use this flaw to crash libreswan by sending specially-crafted IKEv1 Informational Exchange packets. The daemon respawns after the crash.
5574 CVE-2020-1759 323 2020-04-13 2021-08-04
5.8
None Remote Medium Not required Partial Partial None
A vulnerability was found in Red Hat Ceph Storage 4 and Red Hat Openshift Container Storage 4.2 where, A nonce reuse vulnerability was discovered in the secure mode of the messenger v2 protocol, which can allow an attacker to forge auth tags and potentially manipulate the data by leveraging the reuse of a nonce in a session. Messages encrypted using a reused nonce value are susceptible to serious confidentiality and integrity attacks.
5575 CVE-2020-1757 20 Bypass 2020-04-21 2020-04-30
5.5
None Remote Low ??? Partial Partial None
A flaw was found in all undertow-2.x.x SP1 versions prior to undertow-2.0.30.SP1, all undertow-1.x.x and undertow-2.x.x versions prior to undertow-2.1.0.Final, where the Servlet container causes servletPath to normalize incorrectly by truncating the path after semicolon which may lead to an application mapping resulting in the security bypass.
5576 CVE-2020-1751 787 DoS Exec Code 2020-04-17 2020-07-09
5.9
None Local Medium Not required Partial Partial Complete
An out-of-bounds write vulnerability was found in glibc before 2.31 when handling signal trampolines on PowerPC. Specifically, the backtrace function did not properly check the array bounds when storing the frame address, resulting in a denial of service or potential code execution. The highest threat from this vulnerability is to system availability.
5577 CVE-2020-1749 319 2020-09-09 2020-12-22
5.0
None Remote Low Not required Partial None None
A flaw was found in the Linux kernel's implementation of some networking protocols in IPsec, such as VXLAN and GENEVE tunnels over IPv6. When an encrypted tunnel is created between two hosts, the kernel isn't correctly routing tunneled data over the encrypted link; rather sending the data unencrypted. This would allow anyone in between the two endpoints to read the traffic unencrypted. The main threat from this vulnerability is to data confidentiality.
5578 CVE-2020-1748 863 Bypass 2020-09-16 2021-07-21
5.0
None Remote Low Not required Partial None None
A flaw was found in all supported versions before wildfly-elytron-1.6.8.Final-redhat-00001, where the WildFlySecurityManager checks were bypassed when using custom security managers, resulting in an improper authorization. This flaw leads to information exposure by unauthenticated access to secure resources.
5579 CVE-2020-1730 476 2020-04-13 2021-09-14
5.0
None Remote Low Not required None None Partial
A flaw was found in libssh versions before 0.8.9 and before 0.9.4 in the way it handled AES-CTR (or DES ciphers if enabled) ciphers. The server or client could crash when the connection hasn't been fully initialized and the system tries to cleanup the ciphers when closing the connection. The biggest threat from this vulnerability is system availability.
5580 CVE-2020-1728 1021 2020-04-06 2021-03-15
5.8
None Remote Medium Not required Partial Partial None
A vulnerability was found in all versions of Keycloak where, the pages on the Admin Console area of the application are completely missing general HTTP security headers in HTTP-responses. This does not directly lead to a security issue, yet it might aid attackers in their efforts to exploit other problems. The flaws unnecessarily make the servers more prone to Clickjacking, channel downgrade attacks and other similar client-based attack vectors.
5581 CVE-2020-1727 20 2020-06-22 2020-06-29
5.5
None Remote Low ??? Partial Partial None
A vulnerability was found in Keycloak before 9.0.2, where every Authorization URL that points to an IDP server lacks proper input validation as it allows a wide range of characters. This flaw allows a malicious to craft deep links that introduce further attack scenarios on affected clients.
5582 CVE-2020-1726 552 2020-02-11 2020-09-28
5.8
None Remote Medium Not required None Partial Partial
A flaw was discovered in Podman where it incorrectly allows containers when created to overwrite existing files in volumes, even if they are mounted as read-only. When a user runs a malicious container or a container based on a malicious image with an attached volume that is used for the first time, it is possible to trigger the flaw and overwrite files in the volume.This issue was introduced in version 1.6.0.
5583 CVE-2020-1725 863 2021-01-28 2021-03-31
5.5
None Remote Low ??? Partial Partial None
A flaw was found in keycloak before version 13.0.0. In some scenarios a user still has access to a resource after changing the role mappings in Keycloak and after expiration of the previous access token.
5584 CVE-2020-1722 400 DoS 2020-04-27 2020-05-26
5.4
None Remote High Not required None None Complete
A flaw was found in all ipa versions 4.x.x through 4.8.0. When sending a very long password (>= 1,000,000 characters) to the server, the password hashing process could exhaust memory and CPU leading to a denial of service and the website becoming unresponsive. The highest threat from this vulnerability is to system availability.
5585 CVE-2020-1719 270 2021-06-07 2021-06-16
5.5
None Remote Low ??? Partial Partial None
A flaw was found in wildfly. The EJBContext principle is not popped back after invoking another EJB using a different Security Domain. The highest threat from this vulnerability is to data confidentiality and integrity. Versions before wildfly 20.0.0.Final are affected.
5586 CVE-2020-1710 2020-09-16 2020-09-22
5.0
None Remote Low Not required None Partial None
The issue appears to be that JBoss EAP 6.4.21 does not parse the field-name in accordance to RFC7230[1] as it returns a 200 instead of a 400.
5587 CVE-2020-1699 22 Dir. Trav. 2020-04-21 2020-04-28
5.0
None Remote Low Not required Partial None None
A path traversal flaw was found in the Ceph dashboard implemented in upstream versions v14.2.5, v14.2.6, v15.0.0 of Ceph storage and has been fixed in versions 14.2.7 and 15.1.0. An unauthenticated attacker could use this flaw to cause information disclosure on the host machine running the Ceph dashboard.
5588 CVE-2020-1695 20 2020-05-19 2020-12-09
5.0
None Remote Low Not required None Partial None
A flaw was found in all resteasy 3.x.x versions prior to 3.12.0.Final and all resteasy 4.x.x versions prior to 4.6.0.Final, where an improper input validation results in returning an illegal header that integrates into the server's response. This flaw may result in an injection, which leads to unexpected behavior when the HTTP response is constructed.
5589 CVE-2020-1685 203 2020-10-16 2020-10-28
5.0
None Remote Low Not required None Partial None
When configuring stateless firewall filters in Juniper Networks EX4600 and QFX 5000 Series devices using Virtual Extensible LAN protocol (VXLAN), the discard action will fail to discard traffic under certain conditions. Given a firewall filter configuration similar to: family ethernet-switching { filter L2-VLAN { term ALLOW { from { user-vlan-id 100; } then { accept; } } term NON-MATCH { then { discard; } } when there is only one term containing a 'user-vlan-id' match condition, and no other terms in the firewall filter except discard, the discard action for non-matching traffic will only discard traffic with the same VLAN ID specified under 'user-vlan-id'. Other traffic (e.g. VLAN ID 200) will not be discarded. This unexpected behavior can lead to unintended traffic passing through the interface where the firewall filter is applied. This issue only affects systems using VXLANs. This issue affects Juniper Networks Junos OS on QFX5K Series: 18.1 versions prior to 18.1R3-S7, except 18.1R3; 18.2 versions prior to 18.2R2-S7, 18.2R3-S1; 18.3 versions prior to 18.3R1-S5, 18.3R2-S4, 18.3R3; 18.4 versions prior to 18.4R1-S7, 18.4R2-S1, 18.4R3; 19.1 versions prior to 19.1R1-S5, 19.1R2; 19.2 versions prior to 19.2R1-S5, 19.2R2.
5590 CVE-2020-1680 131 DoS 2020-10-16 2020-10-28
5.0
None Remote Low Not required None None Partial
On Juniper Networks MX Series with MS-MIC or MS-MPC card configured with NAT64 configuration, receipt of a malformed IPv6 packet may crash the MS-PIC component on MS-MIC or MS-MPC. This issue occurs when a multiservice card is translating the malformed IPv6 packet to IPv4 packet. An unauthenticated attacker can continuously send crafted IPv6 packets through the device causing repetitive MS-PIC process crashes, resulting in an extended Denial of Service condition. This issue affects Juniper Networks Junos OS on MX Series: 15.1 versions prior to 15.1R7-S7; 15.1X53 versions prior to 15.1X53-D593; 16.1 versions prior to 16.1R7-S8; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S6; 17.4 versions prior to 17.4R2-S11, 17.4R3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.2X75 versions prior to 18.2X75-D41, 18.2X75-D430, 18.2X75-D53, 18.2X75-D65; 18.3 versions prior to 18.3R2-S4, 18.3R3; 18.4 versions prior to 18.4R2-S5, 18.4R3; 19.1 versions prior to 19.1R2; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2.
5591 CVE-2020-1672 20 DoS 2020-10-16 2020-10-27
5.0
None Remote Low Not required None None Partial
On Juniper Networks Junos OS devices configured with DHCPv6 relay enabled, receipt of a specific DHCPv6 packet might crash the jdhcpd daemon. The jdhcpd daemon automatically restarts without intervention, but continuous receipt of specific crafted DHCP messages will repeatedly crash jdhcpd, leading to an extended Denial of Service (DoS) condition. Only DHCPv6 packet can trigger this issue. DHCPv4 packet cannot trigger this issue. This issue affects Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R2-S2, 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R2-S1, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2.
5592 CVE-2020-1671 2020-10-16 2020-10-27
5.0
None Remote Low Not required None None Partial
On Juniper Networks Junos OS platforms configured as DHCPv6 local server or DHCPv6 Relay Agent, Juniper Networks Dynamic Host Configuration Protocol Daemon (JDHCPD) process might crash with a core dump if a malformed DHCPv6 packet is received, resulting with the restart of the daemon. This issue only affects DHCPv6, it does not affect DHCPv4. This issue affects: Juniper Networks Junos OS 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.2X75 versions prior to 18.2X75-D65; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.2 version 19.2R2 and later versions; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2; This issue does not affect Juniper Networks Junos OS prior to 17.4R1.
5593 CVE-2020-1665 DoS 2020-10-16 2020-10-28
5.0
None Remote Low Not required None None Partial
On Juniper Networks MX Series and EX9200 Series, in a certain condition the IPv6 Distributed Denial of Service (DDoS) protection might not take affect when it reaches the threshold condition. The DDoS protection allows the device to continue to function while it is under DDoS attack, protecting both the Routing Engine (RE) and the Flexible PIC Concentrator (FPC) during the DDoS attack. When this issue occurs, the RE and/or the FPC can become overwhelmed, which could disrupt network protocol operations and/or interrupt traffic. This issue does not affect IPv4 DDoS protection. This issue affects MX Series and EX9200 Series with Trio-based PFEs (Packet Forwarding Engines). Please refer to https://kb.juniper.net/KB25385 for the list of Trio-based PFEs. This issue affects Juniper Networks Junos OS on MX series and EX9200 Series: 17.2 versions prior to 17.2R3-S4; 17.2X75 versions prior to 17.2X75-D102, 17.2X75-D110; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2; 18.2 versions prior to 18.2R2-S7, 18.2R3, 18.2R3-S3; 18.2X75 versions prior to 18.2X75-D30; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2.
5594 CVE-2020-1657 DoS 2020-10-16 2020-10-27
5.0
None Remote Low Not required None None Partial
On SRX Series devices, a vulnerability in the key-management-daemon (kmd) daemon of Juniper Networks Junos OS allows an attacker to spoof packets targeted to IPSec peers before a security association (SA) is established thereby causing a failure to set up the IPSec channel. Sustained receipt of these spoofed packets can cause a sustained Denial of Service (DoS) condition. This issue affects IPv4 and IPv6 implementations. This issue affects Juniper Networks Junos OS on SRX Series: 12.3X48 versions prior to 12.3X48-D90; 15.1X49 versions prior to 15.1X49-D190; 17.4 versions prior to 17.4R2-S9, 17.4R3; 18.1 versions prior to 18.1R3-S9; 18.2 versions prior to 18.2R3; 18.3 versions prior to 18.3R1-S7, 18.3R2-S3, 18.3R3; 18.4 versions prior to 18.4R1-S6, 18.4R2-S3, 18.4R3; 19.1 versions prior to 19.1R1-S4, 19.1R2. This issue does not affect 12.3 or 15.1 releases which are non-SRX Series releases.
5595 CVE-2020-1656 20 DoS Exec Code 2020-10-16 2020-10-27
5.8
None Local Network Low Not required Partial Partial Partial
The DHCPv6 Relay-Agent service, part of the Juniper Enhanced jdhcpd daemon shipped with Juniper Networks Junos OS has an Improper Input Validation vulnerability which will result in a Denial of Service (DoS) condition when a DHCPv6 client sends a specific DHPCv6 message allowing an attacker to potentially perform a Remote Code Execution (RCE) attack on the target device. Continuous receipt of the specific DHCPv6 client message will result in an extended Denial of Service (DoS) condition. If adjacent devices are also configured to relay DHCP packets, and are not affected by this issue and simply transparently forward unprocessed client DHCPv6 messages, then the attack vector can be a Network-based attack, instead of an Adjacent-device attack. No other DHCP services are affected. Receipt of the packet without configuration of the DHCPv6 Relay-Agent service, will not result in exploitability of this issue. This issue affects Juniper Networks Junos OS: 12.3 versions prior to 12.3R12-S15; 12.3X48 versions prior to 12.3X48-D95; 14.1X53 versions prior to 14.1X53-D53; 15.1 versions prior to 15.1R7-S6; 15.1X49 versions prior to 15.1X49-D200; 15.1X53 versions prior to 15.1X53-D593; 16.1 versions prior to 16.1R7-S7; 16.2 versions prior to 16.2R2-S11; 17.1 versions prior to 17.1R2-S11, 17.1R3-S2; 17.2 versions prior to 17.2R3-S3; 17.2X75 versions prior to 17.2X75-D44; 17.3 versions prior to 17.3R3-S7; 17.4 versions prior to 17.4R2-S9, 17.4R3; 18.1 versions prior to 18.1R3-S9; 18.2 versions prior to 18.2R2-S6, 18.2R3-S2; 18.2X75 versions prior to 18.2X75-D12, 18.2X75-D33, 18.2X75-D435, 18.2X75-D60; 18.3 versions prior to 18.3R1-S7, 18.3R2-S3, 18.3R3-S1; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3; 19.1 versions prior to 19.1R1-S4, 19.1R2; 19.2 versions prior to 19.2R1-S3, 19.2R2; 19.3 versions prior to 19.3R2.
5596 CVE-2020-1655 400 DoS 2020-07-17 2021-07-21
5.0
None Remote Low Not required None None Partial
When a device running Juniper Networks Junos OS with MPC7, MPC8, or MPC9 line cards installed and the system is configured for inline IP reassembly, used by L2TP, MAP-E, GRE, and IPIP, the packet forwarding engine (PFE) will become disabled upon receipt of large packets requiring fragmentation, generating the following error messages: [LOG: Err] MQSS(0): WO: Packet Error - Error Packets 1, Connection 29 [LOG: Err] eachip_hmcif_rx_intr_handler(7259): EA[0:0]: HMCIF Rx: Injected checksum error detected on WO response - Chunk Address 0x0 [LOG: Err] MQSS(0): DRD: RORD1: CMD reorder ID error - Command 11, Reorder ID 1838, QID 0 [LOG: Err] MQSS(0): DRD: UNROLL0: HMC chunk length error in stage 5 - Chunk Address: 0x4321f3 [LOG: Err] MQSS(0): DRD: UNROLL0: HMC chunk address error in stage 5 - Chunk Address: 0x0 [LOG: Notice] Error: /fpc/8/pfe/0/cm/0/MQSS(0)/0/MQSS_CMERROR_DRD_RORD_ENG_INT_REG_CMD_FSM_STATE_ERR (0x2203cc), scope: pfe, category: functional, severity: major, module: MQSS(0), type: DRD_RORD_ENG_INT: CMD FSM State Error [LOG: Notice] Performing action cmalarm for error /fpc/8/pfe/0/cm/0/MQSS(0)/0/MQSS_CMERROR_DRD_RORD_ENG_INT_REG_CMD_FSM_STATE_ERR (0x2203cc) in module: MQSS(0) with scope: pfe category: functional level: major [LOG: Notice] Performing action get-state for error /fpc/8/pfe/0/cm/0/MQSS(0)/0/MQSS_CMERROR_DRD_RORD_ENG_INT_REG_CMD_FSM_STATE_ERR (0x2203cc) in module: MQSS(0) with scope: pfe category: functional level: major [LOG: Notice] Performing action disable-pfe for error /fpc/8/pfe/0/cm/0/MQSS(0)/0/MQSS_CMERROR_DRD_RORD_ENG_INT_REG_CMD_FSM_STATE_ERR (0x2203cc) in module: MQSS(0) with scope: pfe category: functional level: major By continuously sending fragmented packets that cannot be reassembled, an attacker can repeatedly disable the PFE causing a sustained Denial of Service (DoS). This issue affects Juniper Networks Junos OS: 17.2 versions prior to 17.2R3-S4 on MX Series; 17.3 versions prior to 17.3R3-S8 on MX Series; 17.4 versions prior to 17.4R2-S10, 17.4R3-S2 on MX Series; 18.1 versions prior to 18.1R3-S10 on MX Series; 18.2 versions prior to 18.2R3-S3 on MX Series; 18.2X75 versions prior to 18.2X75-D41, 18.2X75-D430, 18.2X75-D65 on MX Series; 18.3 versions prior to 18.3R1-S7, 18.3R2-S4, 18.3R3-S1 on MX Series; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3 on MX Series; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3 on MX Series; 19.2 versions prior to 19.2R1-S4, 19.2R2 on MX Series; 19.3 versions prior to 19.3R2-S2, 19.3R3 on MX Series. This issue is specific to inline IP reassembly, introduced in Junos OS 17.2. Versions of Junos OS prior to 17.2 are unaffected by this vulnerability.
5597 CVE-2020-1653 772 2020-07-17 2021-10-19
5.0
None Remote Low Not required None None Partial
On Juniper Networks Junos OS devices, a stream of TCP packets sent to the Routing Engine (RE) may cause mbuf leak which can lead to Flexible PIC Concentrator (FPC) crash or the system to crash and restart (vmcore). This issue can be trigged by IPv4 or IPv6 and it is caused only by TCP packets. This issue is not related to any specific configuration and it affects Junos OS releases starting from 17.4R1. However, this issue does not affect Junos OS releases prior to 18.2R1 when Nonstop active routing (NSR) is configured [edit routing-options nonstop-routing]. The number of mbufs is platform dependent. The following command provides the number of mbufs counter that are currently in use and maximum number of mbufs that can be allocated on a platform: user@host> show system buffers 2437/3143/5580 mbufs in use (current/cache/total) Once the device runs out of mbufs, the FPC crashes or the vmcore occurs and the device might become inaccessible requiring a manual restart. This issue affects Juniper Networks Junos OS 17.4 versions prior to 17.4R2-S11, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S5; 18.2X75 versions prior to 18.2X75-D41, 18.2X75-D420.12, 18.2X75-D51, 18.2X75-D60, 18.2X75-D34; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3-S1; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2. Versions of Junos OS prior to 17.4R1 are unaffected by this vulnerability.
5598 CVE-2020-1650 400 DoS 2020-07-17 2021-07-21
5.0
None Remote Low Not required None None Partial
On Juniper Networks Junos MX Series with service card configured, receipt of a stream of specific packets may crash the MS-PIC component on MS-MIC or MS-MPC. By continuously sending these specific packets, an attacker can repeatedly bring down MS-PIC on MS-MIC/MS-MPC causing a prolonged Denial of Service. This issue affects MX Series devices using MS-PIC, MS-MIC or MS-MPC service cards with any service configured. This issue affects Juniper Networks Junos OS on MX Series: 17.2R2-S7; 17.3R3-S4, 17.3R3-S5; 17.4R2-S4 and the subsequent SRs (17.4R2-S5, 17.4R2-S6, etc.); 17.4R3; 18.1R3-S3, 18.1R3-S4, 18.1R3-S5, 18.1R3-S6, 18.1R3-S7, 18.1R3-S8; 18.2R3, 18.2R3-S1, 18.2R3-S2; 18.3R2 and the SRs based on 18.3R2; 18.4R2 and the SRs based on 18.4R2; 19.1R1 and the SRs based on 19.1R1; 19.2R1 and the SRs based on 19.2R1; 19.3R1 and the SRs based on 19.3R1.
5599 CVE-2020-1649 20 DoS 2020-07-17 2021-07-21
5.0
None Remote Low Not required None None Partial
When a device running Juniper Networks Junos OS with MPC7, MPC8, or MPC9 line cards installed and the system is configured for inline IP reassembly, used by L2TP, MAP-E, GRE, and IPIP, the packet forwarding engine (PFE) will become disabled upon receipt of small fragments requiring reassembly, generating the following error messages: [LOG: Err] MQSS(2): WO: Packet Error - Error Packets 1, Connection 29 [LOG: Err] eachip_hmcif_rx_intr_handler(7259): EA[2:0]: HMCIF Rx: Injected checksum error detected on WO response - Chunk Address 0x0 [LOG: Err] MQSS(2): DRD: RORD1: CMD reorder ID error - Command 11, Reorder ID 1960, QID 0 [LOG: Err] MQSS(2): DRD: UNROLL0: HMC chunk address error in stage 5 - Chunk Address: 0xc38fb1 [LOG: Notice] Error: /fpc/0/pfe/0/cm/0/MQSS(2)/2/MQSS_CMERROR_DRD_RORD_ENG_INT_REG_CMD_FSM_STATE_ERR (0x2203cc), scope: pfe, category: functional, severity: major, module: MQSS(2), type: DRD_RORD_ENG_INT: CMD FSM State Error [LOG: Notice] Performing action cmalarm for error /fpc/0/pfe/0/cm/0/MQSS(2)/2/MQSS_CMERROR_DRD_RORD_ENG_INT_REG_CMD_FSM_STATE_ERR (0x2203cc) in module: MQSS(2) with scope: pfe category: functional level: major [LOG: Notice] Performing action get-state for error /fpc/0/pfe/0/cm/0/MQSS(2)/2/MQSS_CMERROR_DRD_RORD_ENG_INT_REG_CMD_FSM_STATE_ERR (0x2203cc) in module: MQSS(2) with scope: pfe category: functional level: major [LOG: Notice] Performing action disable-pfe for error /fpc/0/pfe/0/cm/0/MQSS(2)/2/MQSS_CMERROR_DRD_RORD_ENG_INT_REG_CMD_FSM_STATE_ERR (0x2203cc) in module: MQSS(2) with scope: pfe category: functional level: major By continuously sending fragmented packets that cannot be reassembled, an attacker can repeatedly disable the PFE causing a sustained Denial of Service (DoS). This issue affects Juniper Networks Junos OS: 17.2 versions prior to 17.2R3-S4 on MX Series; 17.3 versions prior to 17.3R3-S8 on MX Series; 17.4 versions prior to 17.4R2-S9, 17.4R3-S1 on MX Series; 18.1 versions prior to 18.1R3-S10 on MX Series; 18.2 versions prior to 18.2R2-S6, 18.2R3-S3 on MX Series; 18.2X75 versions prior to 18.2X75-D34, 18.2X75-D41, 18.2X75-D53, 18.2X75-D65, 18.2X75-D430 on MX Series; 18.3 versions prior to 18.3R1-S7, 18.3R2-S4, 18.3R3-S2 on MX Series; 18.4 versions prior to 18.4R1-S6, 18.4R2-S4, 18.4R3 on MX Series; 19.1 versions prior to 19.1R1-S4, 19.1R2-S1, 19.1R3 on MX Series; 19.2 versions prior to 19.2R1-S3, 19.2R2 on MX Series; 19.3 versions prior to 19.3R2-S2, 19.3R3 on MX Series. This issue is specific to inline IP reassembly, introduced in Junos OS 17.2. Versions of Junos OS prior to 17.2 are unaffected by this vulnerability.
5600 CVE-2020-1648 20 DoS 2020-07-17 2021-10-25
5.0
None Remote Low Not required None None Partial
On Juniper Networks Junos OS and Junos OS Evolved devices, processing a specific BGP packet can lead to a routing process daemon (RPD) crash and restart. This issue can occur even before the BGP session with the peer is established. Repeated receipt of this specific BGP packet can result in an extended Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS: 18.2X75 versions starting from 18.2X75-D50.8, 18.2X75-D60 and later versions, prior to 18.2X75-D52.8, 18.2X75-D53, 18.2X75-D60.2, 18.2X75-D65.1, 18.2X75-D70; 19.4 versions 19.4R1 and 19.4R1-S1; 20.1 versions prior to 20.1R1-S2, 20.1R2. Juniper Networks Junos OS Evolved: 19.4-EVO versions prior to 19.4R2-S2-EVO; 20.1-EVO versions prior to 20.1R2-EVO. This issue does not affect: Juniper Networks Junos OS releases prior to 19.4R1. Juniper Networks Junos OS Evolved releases prior to 19.4R1-EVO.
Total number of vulnerabilities : 31212   Page : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 (This Page)113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625
CVE is a registred trademark of the MITRE Corporation and the authoritative source of CVE content is MITRE's CVE web site. CWE is a registred trademark of the MITRE Corporation and the authoritative source of CWE content is MITRE's CWE web site. OVAL is a registered trademark of The MITRE Corporation and the authoritative source of OVAL content is MITRE's OVAL web site.
Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.